STUDENT RESEARCH

• Graber-Adamsons, S. (2024). Clearing the Air: Assessing and Quantifying the Acute Impact of Changes in Airborne Particulate Matter Concentrations in Communities Across the United States.
• Shumway, T. (2020). Fifty years of environmental policy absence: Examining our country's past and present federal administrations inaction of defining PFOS and PFOA toxicity levels.
• Morales, M. (2019). Wind energy: mapping the future of wind power in the United States.
• Nouet, A. (2018). The Environmental Impact of Pervious Concrete Containing Waste Materials.
• Molloy, J. (2017). Extrapolating Impervious Surface and Land Cover Data to Correlate Land Use with Water Chemistry.
• Kelly, C. (2015). Employing Geographic Information Systems (GIS) in Longshore Drift Analysis of the United States East Coast; A Study of Erosion, Risk Assessment, Mitigation, Cost Analysis, and Coastal Engineering Practices.
• Askin, K. (2014). Geographic LEED Potential for Schenectady Construction Projects.
• Smith, C. (2013). The effect of Emission of Coal-Fired Power Plants on Human's Respiratory System.
• Askin, K. (2012). Intrinsic Characteristics of Concrete Mixtures Containing Post-Consumer Packing Foam
• Engle, B. (2012). The State of Sustainable Transportation at Union College.
• Rothblum, S. (2011). A Holistic Evaluation of Coastal Management in the 21th Century: An Evaluation of Modern Engineering Methods and Policy.
• Samia, E. (2010). Use of solid waste in developing greener concrete for a sustainable environment.
• Porter, T. (2009). Get a Second Life.
• Beltran, P. (2009). Hydroponic Agriculture – A Solution for Global Hunger.
• Campano, J. (2008). Analysis of Remotely Sensed Images.
• Doyle, C. (2008). Digital Image Analysis.
• Heiser A. (2008). Freeze-Thaw Behavior of Pervious Rubberized Concrete.
• Heiser A. (2007). Development of Environmentally Friendly Pervious Concrete and Modular Blocks.
• Bono, M. (2006). Development of Graphics-Based Engineering Models.
• Kodedova, S. (2006). Development of partition panels impregnated with recycled materials.
• Bogino, M. (2006). Using SolidWorks in Developing Structural Models.
• Guernsey, H. (2005). Mechanical properties of cemented rubberized sand.
• Guigli, M. (2005). Development of labs of a new GIS course.
• Redina, T. (2005). Waste Disposal Effects on the Mechanical Viability of Sand Soils.
• Bogino, M. (2005). Engineering an engineering puzzle: Developing the components of an engineering puzzle.
• Graham, M. (2004). Pullout and Shearing Resistance of Smooth and Textured Geomembranes in Clean and Rubberized Sands.
• Christensen, J. (2004). Behavior of Centrifugally Reconstituted Clays Treated with Fly Ash and/or Cement Additives.
• Lesmiester, M. (2003). Computation of Anchor Pullout Capacity via the Internet.
• Losure, M. (2003). Animated production of standard procedures of materials testing.
• Ruzycky, L. (2003). Effect of freeze and thaw on compressive strength of rubberized concrete.
• Losure, M. (2002). Computer Simulations of Unconventional Construction Techniques.
• Ruzycky, L. (2002). Development of polymer grid-reinforced rubberized concrete panels.
• DeLaughter, D. (2002). Analysis of grid grid-reinforced rubberized concrete panels.
• Lesmiester, M. (2002). Effect of Ultra Violet Exposure on Rubberized Concrete.
• DeLaughter, D. (2001). Earth Sheltered Construction.
• Zdrahal, J. (2001). Strength and durability of rubberized concrete under normal and freeze-thaw conditions.
• Cahill, J. (2000). Bond strength of nylon-coated reinforcing bars.
• Kolarova, H. (2000). Polymerization of crumb rubberized asphalt.
• Cahill, J. (2000). Strength and deformation characteristics of rubberized concrete.
• Chan, J. (2000). An Internet approach to deep foundations design.
• Little, M. (1999). Geotechnical and structural design of foundations.
• Cogan, J. (1998). Shear strength of cohesionless materials reinforced with granular scrap tires.
• Gill, M. (1998). Durability and strength of concrete made with recycled materials.
• Donaldson, R. (1998). Behavior of natural and geogrid-reinforced earth slopes under static and dynamic loading.
• Cossey, M. (1998). A Modernistic Approach to Structural Design of Foundations.
• Barth, K. (1997). Strength characteristics of the behavior of rubberized asphalt.
• Parlakian, M. (1997). Design of a timber bridge.
• Ross, R. (1997). A parametric study on sheet pile walls and pile foundations.
• Kronholm, J. (1997). Strength properties of cemented and oil-contaminated sand.
• Neumann, P. (1996). Performance of geogrid-reinforced asphalt layers.
• Robinson, S. (1996). Static and dynamic behavior of natural and reinforced earth slopes.
• Tolkoff, S. (1996). The application of geogrids to roadbed stabilization”.
• Klimkewicz, L. (1996). A structural and geotechnical investigation of the design of a bridge.
• McKenna, W. (1996). Factors affecting the mechanical properties of artificially cemented sand”.
• Moxham, G. (1996). Study of the water supply system of Lake Mohonk Mountain House”.
• Pessolano, K. (1996). Structural and geotechnical design of underground tunnels.
• Koroso, J. (1995). Design and settlement verification of compensated foundations”.
• Capovani, J. (1995). Behavior of centrifugally reconstituted cohesive soils (I) Experimental investigation”.
• Ketchum, P. (1995). Behavior of centrifugally reconstituted cohesive soils (II) Data interpretation”.
• Pechar, J. (1995). A simplified approach to calculate moments acting on mat foundations”.
• Pessolano, K. (1995). “The mechanical plastic limit device”.
• Pessolano, K. (1995). Stress Evaluation of Soils Compacted According to the ASTM Standards.
• Seaverson, E. (1995). Effect of temperature variation on stresses and strains in asphalt pavement under static and repeated loading”.
• McKenna, W. (1995). Experimental investigation of mechanical properties of soils”.
• D'Aniello, S. (1994). Settlement due to fluctuation of ground water table”.
• Humphreys, W. (1994). Effect of cyclic loading on shear strength of sands”.
• Oswitt, G. (1994). Stress and strain behavior of rubberized asphalt Under static and repeated loading”.
• Henry, S. (1994). On the behavior of civil engineering materials”.